101 Earthmoving And Mobile Plant in QLD for sale

Serial: 63W04224; ROPS Cabin, Payload Approx 50 Ton,

with ROPS; with FOPS; Serial: 4062041;

Serial: CAT0793CAATY00549; Hour Reading is Only Approximate. 16 Cylinder 2166 HP Turbocharged Diesel Engine, 40.00 - R57 Tires, 240T Payload, Fire Suppression, Isolators, Hydraulic Walkway Access, Mine Specification. , Removal of This Asset is at the Expense of the Buyer. Any Cranage or Works Needed on Site is to be Done by Site Approved Contractors, at Buyers Expense.

Serial: 60018; Hour Reading is Only Approximate. Machine is a NON-Runner. Transmission Has Been Removed. Cummins QSK 60 16 Cylinder 1560HP Turbo Diesel, 6 Speed Powershift, 17.2m3 Bucket Capacity, ROPS / FOPS Cabin, Isolators. , Removal of This Asset is at the Expense of the Buyer. Any Cranage or Works Needed on Site is to be Done by Site Approved Contractors, at Buyers Expense., *** Please Note That The Compliance Plate Is Missing From This Asset ***

Serial: 732722; Caterpillar C32 Acert V12 Turbocharged Diesel Engine, 9- 13.75 Inch Hole Diameter, 279" Hole Depth, 600HP Diesel Engine, 90,000 LB Pull Down, 140Kg Operating Weight, 4 x 48" Hydraulic Jacks. *** Please Note That The Compliance Plate Is Missing From This Asset ***

Serial: KMTPC090E02020058; CIRCA 2005,Komatsu PC600-7 Excavator (Steel Tracked),6 Cyl, Diesel, Intercooler Turbo, Odometer not visible,, Colour: Yellow, Unregistered, VIN: KMTPC090E02020058,Serial No: KMTPC090E02020058,Sold with No Plates

Serial: TRX140RSA0MM34744; Build Sheet: • Tier 3 / Stage IIIA – Caterpillar C15 403W (540hP) engine • - Terex CR032 Impact chamber • - Fully Hydraulically assisted apron setting and hydraulic apron release • - Manual raise inlet allowing extra inlet clearance • - 4 bar rotor • - Direct Drive via Clutch • - Drive belt tensioner wheel • - Blow bar lifting tool supplied • - Selectable discharge to by-pass conveyor or main conveyor • - 1300mm (51”) belt full length • - Piped for overband magnet • - Hydraulic raise / lower for magnet • - 4.88m x 1.52m (16’ x 5’) single deck after screen • - 500mm (20”) wide belt transfer conveyor, • - 500mm (20”) wide belt hydraulic folding re-circulating conveyor able to slew for stockpiling oversize materials • - 1400mm (55”) wide belt fines conveyor • - Rapid detach after screen system for flexibility • - Piped for dust suppression c/w spray bars • - Emergency stops • - Hand Held Track Control Set with Connection Lead • - T-Link Telemetry System fitted • - Radio remote system: operational controls of machine (auto start/stop) & track movement, • OPTIONAL EQUIPMENT INCLUDED IN MACHINE PRICE • - Smaller engine chamber drive pulley fitted to give a rotor tip speed range of 31-39 m/sec (102-128ft/sec). • - Rotor fitted with 4 full high chrome blow bars • - Independent pre-screen c/w hydraulically folding and locking hopper and blanking mat, 50mm cassette spacing & 38mm mesh • - Bypass conveyor with 800mm wide plain belt, discharging to the RHS of the machine • - Twinpole heavy duty overband magnet c/w stainless steel skirting & stainless steel discharge chute, discharging to the RHS of the machine • - Hot climate lubrication kit (Recommended for ambient temperatures between +15 to +50°C) • - Pressurised air system for electrical control cabinet • - Grinding path • - Allenlube Auto Grease System • - Full set of high chrome blowbar replacements • - Large number of chamber plate and wear tip replacements

with ROPS; with FOPS; Serial: WNCR0510KHAA00349;

John Deere Motor, Eyelet Hitch, Jockey Stand, Transport Dimensions Approx: 5300mm (L) x 2500mm (W) x 2400mm (H)

Serial: 142K491; Work Light, 600mm (W) Bucket, Roll Over Protection, Transport Dimensions Approx: 3000mm (L) x 1300mm (W) x 2500mm (H)

Serial: XLC1903658; Fork Tines: 1200mm (L), Bucket Attachment: 1800mm (W) Claw Attachment, Work Lights, Transport Dimensions Approx: 6000mm (L) x 2400mm (W) x 2000mm (H)