109 Earthmoving And Mobile Plant in QLD for sale

with ROPS; with FOPS; Serial: M80113101; Quick Hitch, Push Blade, Mud Bucked Width-1200mm, Hammer Piping, Unknown Mechanical/ Hydraulic Issue.

Serial: 1VRL0705PM1004286; * Asset Located Bundaberg Qld 4680 * Norm Engineering 4-IN-1 Bucket, Kubota Diesel Motor.

Serial: 0000; NON-Runner. Mechanical Condition Unknown.

Serial: KMTPC255PRC035488; Approx 220 Operating Hours,

Serial: 60013; Machine Hours Approximately 59,337 Hrs. Bucket Refurbished Nov 2019, Approx. Weight 19,520kg. Cummins QSK 60 16 Cylinder 1560HP Turbo Diesel, 6 Speed Powershift, 17.2m3 Bucket Capacity, ROPS / FOPS Cabin, Isolators. , Removal of This Asset is at the Expense of the Buyer. Any Cranage and Works Needed on Site to be Completed by Site Approved Contractors, at the Buyers Expense.

Serial: ATY01042; Cat 3516A 16 Cylinder 2166 HP Turbocharged Diesel Engine, 40.00 - R57 Tires, 240T Payload, Fire Suppression, Isolators, Hydraulic Walkway Access, Mine Specification.

Serial: ATY00762; Caterpillar 3516A V16 Cylinder 2166 HP Turbocharged Diesel Engine, 40.00 - R57 Tires, 240T Payload, Fire Suppression, Isolators, Hydraulic Walkway Access, Mine Specification.

Serial: 2BW00816; Caterpillar V16 Cylinder 2166 HP Turbocharged Diesel Engine, 40.00 - R57 Tires, 240T Payload, Fire Suppression, Isolators, Hydraulic Walkway Access, Mine Specification.

Serial: 0130036474; Commission 2021, Max Lift Height: 3m, Max Weight Capacity: 365kg

Serial: H11600022; MRC: 57,000kgs

Serial: 00000; No Visible Identification Plates. NON-Runner. Mechanical Condition Unknown.

Serial: CAT0793CAATY00549; Hour Reading is Only Approximate. 16 Cylinder 2166 HP Turbocharged Diesel Engine, 40.00 - R57 Tires, 240T Payload, Fire Suppression, Isolators, Hydraulic Walkway Access, Mine Specification. , Removal of This Asset is at the Expense of the Buyer. Any Cranage or Works Needed on Site is to be Done by Site Approved Contractors, at Buyers Expense.

Serial: 60018; Hour Reading is Only Approximate. Machine is a NON-Runner. Transmission Has Been Removed. Cummins QSK 60 16 Cylinder 1560HP Turbo Diesel, 6 Speed Powershift, 17.2m3 Bucket Capacity, ROPS / FOPS Cabin, Isolators. , Removal of This Asset is at the Expense of the Buyer. Any Cranage or Works Needed on Site is to be Done by Site Approved Contractors, at Buyers Expense., *** Please Note That The Compliance Plate Is Missing From This Asset ***

Serial: 732722; Caterpillar C32 Acert V12 Turbocharged Diesel Engine, 9- 13.75 Inch Hole Diameter, 279" Hole Depth, 600HP Diesel Engine, 90,000 LB Pull Down, 140Kg Operating Weight, 4 x 48" Hydraulic Jacks. *** Please Note That The Compliance Plate Is Missing From This Asset ***

Serial: 3462348;

Serial: TRX140RSA0MM34744; Build Sheet: • Tier 3 / Stage IIIA – Caterpillar C15 403W (540hP) engine • - Terex CR032 Impact chamber • - Fully Hydraulically assisted apron setting and hydraulic apron release • - Manual raise inlet allowing extra inlet clearance • - 4 bar rotor • - Direct Drive via Clutch • - Drive belt tensioner wheel • - Blow bar lifting tool supplied • - Selectable discharge to by-pass conveyor or main conveyor • - 1300mm (51”) belt full length • - Piped for overband magnet • - Hydraulic raise / lower for magnet • - 4.88m x 1.52m (16’ x 5’) single deck after screen • - 500mm (20”) wide belt transfer conveyor, • - 500mm (20”) wide belt hydraulic folding re-circulating conveyor able to slew for stockpiling oversize materials • - 1400mm (55”) wide belt fines conveyor • - Rapid detach after screen system for flexibility • - Piped for dust suppression c/w spray bars • - Emergency stops • - Hand Held Track Control Set with Connection Lead • - T-Link Telemetry System fitted • - Radio remote system: operational controls of machine (auto start/stop) & track movement, • OPTIONAL EQUIPMENT INCLUDED IN MACHINE PRICE • - Smaller engine chamber drive pulley fitted to give a rotor tip speed range of 31-39 m/sec (102-128ft/sec). • - Rotor fitted with 4 full high chrome blow bars • - Independent pre-screen c/w hydraulically folding and locking hopper and blanking mat, 50mm cassette spacing & 38mm mesh • - Bypass conveyor with 800mm wide plain belt, discharging to the RHS of the machine • - Twinpole heavy duty overband magnet c/w stainless steel skirting & stainless steel discharge chute, discharging to the RHS of the machine • - Hot climate lubrication kit (Recommended for ambient temperatures between +15 to +50°C) • - Pressurised air system for electrical control cabinet • - Grinding path • - Allenlube Auto Grease System • - Full set of high chrome blowbar replacements • - Large number of chamber plate and wear tip replacements

Serial: 6ZJ01026; This Machine is a NON-Runner. Mechanical Condition Unknown. Blade Cylinder Missing, Operator Seat Missing. Various Cabin Parts and Small Componentry Missing. Enclosed Cab, Multi Shank Ripper Box, Mine Spec. Removal of This Asset is at the Expense of the Buyer. Any Cranage or Works Required on Site is to be Performed by Site Authorised Contractors, at Buyers Expense. Approved Contractors Attached.

Ex-Council, Articulating 4-in-1 Bucket, Work Lights, Rear Counter Weights, Bucket Dimensions Approx: 1750mm (W)